English  
Italiano  
     
 

iP24 Digital Loudspeaker Processor 

  • Type: Multi-function DSP loudspeaker management system

  • Input: two analog electronically balanced or digital AES/EBU (one connectors, two audio channels), remotely selectable

  • Balanced analog input impedance: 100 kΩ

  • Maximum Input level: +20 / +10 dBu @ 1kHz, remotely selectable

  • Output: two analog electronically balanced and digital AES/EBU (two connectors, four audio channels)

  • Balanced analog output impedance: 47 Ω

  • Maximum analog output level: +20 dBu @ 1kHz with 600 Ω load

  • 96 kHz sample rate

  • Frequency response: 20 Hz ÷ 20 kHz (0.1 dB)

  • THD: -100 dB

  • Dynamic Range: 120dB
  • Input & Output Connectors: 3 pin XLR
  • Other Connectors: Ethernet (RJ-45), Serial Port (RJ-45), General Purpose (DB9) with two inputs and two Outputs as free contact
  • Dimensions: 1U standard EIA 19-inch rack 

 

 

 

 

 

 

--> iP24 Control APP is here

--> iP24 Photo gallery is here

--> iP24 Presets here

--> iP24 Control APP User Guide is here

--> The Complete Video Tutorial gallery is here

--> The Product Brochure is here

--> The Product Manual is here

 
   
 

Mini-COM.P.A.S.S. iSP 

  • Type: compact self-powered line array element.

  • Adjustable horizontal directivity from 60° to 150° in 16 different combinations.

  • Transducers: four 5” woofers in bass-reflex configuration plus two 1.75” diaphragm compression drivers loaded onto 2 x D.P.R.W.G. (Outline’s patented waveguide).

  • Integrated two-channel amplifier, delivering 2 x 500 W EIAJ on 4 Ω.

  • Integrated light weight, high strength rigging hardware, that’s resistant to corrosion and abrasion.

  • Vertical angle between elements selectable from 0° to 7.5° with minimum steps of 0.5°.

  • Aluminium rigging frame designed to enable both stacked and flying arrays. It can be used in single or dual motor configurations and can lift up to 12 elements (300 kg, 660 lb).

  • Unequalled versatility: the system is adaptable to suit any possible situation, according to the audience to be covered.

  • Applicable as front of house system in installations and small tours.

  • Frequency response: 100 Hz ÷ 20 kHz (processed).

  • Max acoustic output: 131 dB SPL peak @ 1 m.

 

--> Mini-COM.P.A.S.S. Control APP is here

--> The Photo gallery is here

--> The Product brochure is here

 
   
 

iSM 112

  • Self-powered dual-angle wedge monitor loudspeaker.

  • Four presets (three of which are adjustable by the user) selectable via a button on the LED panel or via software.

  • Very low physical profile combined with extremely high-level audio output - only 35.5 cm (14 inches) high yet can deliver up to 132 dB SPL.

  • Compact and lightweight, just 25 kg (55.1 lb) including bi-amped processing and amplification.

  • The patented folded wave guide provides tight and consistent control of the emitted frequencies in both the horizontal and vertical planes, achieving the defined pattern control that is necessary in professional floor monitors, whilst still contained within a compact cabinet design.

  • Mirrored LED arrays on both sides of the cabinet provide visual status data.

  • Extremely sturdy, non-resonant cabinet design.

  • Internal PWM amplification eliminates need for heavy and space-hungry amplifier racks.

  • Transducers: a single 12” high-pass loaded neodymium woofer plus a 2.5” diaphragm compression driver with a folded waveguide.

  • Frequency response: 68 Hz ÷ 18 kHz (processed).

  • Amplifier rated power: 500 W EIAJ on 4 Ω plus 270 W EIAJ on 8 Ω.

--> iSM Series Control APP is here

--> The Photo gallery is here

--> The Product brochure is here

 
   
 

iSM 115

  • Self-powered dual-angle wedge monitor loudspeaker.

  • Four presets (three of which are adjustable by the user) selectable via a button on the LED panel or via software.

  • Very low physical profile combined with extremely high-level audio output - only 39.5 cm (15.6 inches) high yet can deliver up to 137 dB SPL.

  • Compact and lightweight, just 27.5 kg (60.6 lb) including bi-amped processing and amplification.

  • The patented folded wave guide provides tight and consistent control of the emitted frequencies in both the horizontal and vertical planes, achieving the defined pattern control that is necessary in professional floor monitors, whilst still contained within a compact cabinet design.

  • Mirrored LED arrays on both sides of the cabinet provide visual status data.

  • Extremely sturdy, non-resonant cabinet design.

  • Internal PWM amplification eliminates need for heavy and space-hungry amplifier racks.

  • Transducers: a single 15” high-pass loaded neodymium woofer plus a 2.5” diaphragm compression driver with a folded waveguide.

  • Frequency response: 59 Hz ÷ 18 kHz (processed).

  • Amplifier rated power: 750 W EIAJ on 4 Ω plus 370 W EIAJ on 8 Ω.

 

--> iSM Series Control APP is here

--> The Photo gallery is here

--> The Product brochure is here

 
   
 

iSM 212

  • Self-powered dual-angle wedge monitor loudspeaker.

  • Four presets (three of which are adjustable by the user) selectable via a button on the LED panel or via software.

  • Very low physical profile combined with extremely high-level audio output - only 32.5 cm (12.8 inches) high yet can deliver up to 140 dB SPL.

  • Compact and lightweight, just 32 kg (70.5 lb) including bi-amped processing and amplification.

  • The patented folded wave guide provides tight and consistent control of the emitted frequencies in both the horizontal and vertical planes, achieving the defined pattern control that is necessary in professional floor monitors, whilst still contained within a compact cabinet design.

  • Mirrored LED arrays on both sides of the cabinet provide visual status data.

  • Extremely sturdy, non-resonant cabinet design.

  • Internal PWM amplification eliminates need for heavy and space-hungry amplifier racks.

  • Transducers: two 12” high-pass loaded neodymium woofer plus a 3” diaphragm compression driver with a folded waveguide.

  • Frequency response: 64 Hz ÷ 18 kHz (processed).

  • Amplifier rated power: 1050 W EIAJ on 4 Ω plus 570 W EIAJ on 16 Ω.

 

--> iSM Series Control APP is here

--> The Photo gallery is here

--> The Product brochure is here

 
   
 

DVS 12P iSP 

  • Self-powered two-way full-range system.

  • Two-way power module (750 W EIAJ per channel) integrated with a two-way iMode DSP.

  • Average dispersion: 95° x 75° (H x V)

  • Reflex loaded 12” neodymium woofer and a 2.5” titanium diaphragm horn loaded compression driver, loaded onto a constant directivity horn.

  • Trapezoidal cabinet with flying hardware on all panels to meet a wide range of mounting and flying requirements for fixed applications or mobile use. Receptacle for fitting support stand.

  • Designed for use as a stage monitor when placed in a horizontal position (with two angles), or front-of-house when used in a vertical position.

  • The system is protected by a steel grille internally covered by an acoustic-transparent foam.

  • Frequency response: 53 Hz ÷ 20 kHz (processed).

  • Max acoustic output: 129 dB SPL peak @ 1 m.


 

 

--> DVS Series Control APP is here

--> The Photo gallery is here

--> The Product brochure is here

 

 
   
 

DVS 15P iSP

  • Self-powered two-way full-range system.

  • Two-way power module (750 W EIAJ per channel) integrated with a two-way iMode DSP.

  • Average dispersion: 90° x 65° (H x V)

  • Reflex loaded 15” neodymium woofer and a 2.5” titanium diaphragm horn loaded compression driver, loaded onto a constant directivity horn.

  • Trapezoidal cabinet with flying hardware on all panels to meet a wide range of mounting and flying requirements for fixed applications or mobile use. Receptacle for fitting support stand.

  • Designed for use as a stage monitor when placed in a horizontal position (with two angles), or front-of-house when used in a vertical position.

  • The system is protected by a steel grille internally covered by an acoustic-transparent foam.

  • Frequency response: 46 Hz ÷ 20 kHz (processed).

  • Max acoustic output: 131 dB SPL peak @ 1 m.

 

--> DVS Series Control APP is here

--> The Photo gallery is here

--> The Product brochure is here

 
   
 

DVS 115 SW iSP

  • High-efficiency self-powered subwoofer.

  • Primarily designed for use with the DVS 12/15 P iSP.

  • Single 15” subwoofer enclosure using phase inversion type loading, which, coupled with the use of several innovative loudspeaker technologies, allows it to deliver consistent performance at the highest levels over many years.

  • Wide bandpass and great extension towards the bottom end of the frequency response.

  • The outer finish applied is a scratch resistant waterproof black paint and the front of the cabinet is protected by an anti-resonant steel grille.

  • A receptacle is available for mounting the optional support of a satellite.

  • Integral handles and an optional trolley facilitate transport, even on uneven surfaces.

  • Frequency response: 39 Hz ÷ 147 Hz (processed).

  • Crossover frequency and type, selectable via iPad application so can be adapted to any situation. The default crossover is a 24 dB/octave Butterworth at 100 Hz.

  • Max acoustic output: 137 dB SPL peak @ 1 m in half-space.

  • Amplifier rated power: 1000 W EIAJ on 8 Ω.

  • Loudspeaker’s power handling: 600 W AES, 2400 W peak.

--> DVS Series Control APP is here

--> The Photo gallery is here

--> The Product brochure is here

 
   
 

DVS 118 SW iSP

  • High-efficiency self-powered subwoofer.

  • Primarily designed for use with the DVS 12/15 P iSP.

  • Single 18” subwoofer enclosure using phase inversion type loading, which, coupled with the use of several innovative loudspeaker technologies, allows it to deliver consistent performance at the highest levels over many years.

  • Wide bandpass and great extension towards the bottom end of the frequency response.

  • The outer finish applied is a scratch resistant waterproof black paint and the front of the cabinet is protected by an anti-resonant steel grille.

  • A receptacle is available for mounting the optional support of a satellite.

  • Integral handles and an optional trolley facilitate transport, even on uneven surfaces.

  • Frequency response: 26 Hz ÷ 118 Hz (processed)

  • Crossover frequency and type selectable via iPad application so can be adapted to any situation. The default crossover is a 24 dB/octave Linkwitz–Riley at 80 Hz.

  • Max acoustic output: 138 dB SPL peak @ 1 m in half-space.

  • Amplifier rated power: 1500 W EIAJ on 8 Ω.

  • Loudspeaker’s power handling: 700 W AES, 2800 W peak.

--> DVS Series Control APP is here

--> The Photo gallery is here

--> The Product brochure is here

 
   
 

FLYSUB 15 iSP

  • Type: self-powered arrayable subwoofer

  • Low frequency reinforcement unit for mini-COM.P.A.S.S. array.

  • Transducer: a single 15” double-spider woofer, customized  to create very low distortion at very high output levels.

  • Hybrid loading designed in order to obtain a superior tonal balance.

  • Crossover frequency and type, selectable via the iPad application so can be adapted to any situation.

  • Integrated amplifier rated power: 1000 W EIAJ on 8 Ω in bridge mode.

  • Integrated light weight, high strength rigging hardware. Fully compatible with mini-COM.P.A.S.S. system.

  • Up to 6 enclosures can be rigged using the mini-COM.P.A.S.S.’ frame, the typical application is a mixed system with FLYSUB and mini-COM.P.A.S.S. enclosures.

  • Frequency response: 35 Hz ÷ 550 Hz (unprocessed).

  • Max acoustic output: 136.5 dB SPL peak @ 1 m in half-space.

 

--> Flysub 15 iSP Control APP is here

--> The Photo gallery is here

--> The Product brochure is here

 
   
 

DBS 18-2 iSP

  • Type: high-power high-efficiency amplified subwoofer.

  • High power integrated amplifier: 3000 W EIAJ.

  • Two 18” long-excursion low frequency transducers featuring innovative technologies to provide premium electro-acoustic performance to reliably deliver very high SPLs over extended periods.

  • The “Decoupled Baffle Subwoofer” assembly contributes to the structural integrity of the entire cabinet as well as reducing resonance and air turbulence noise from the reflex ports.

  • Specifically designed to be ground-stacked, the cabinet is equipped with sturdy feet to protect it and provide a solid base.

  • Optional trolley-board - using a “stack & strap” method of location - aids handling and transportation.

  • Crossover frequency and type, selectable via the iPad application so can be adapted to any situation.

  • Frequency response: 28 Hz ÷ 160 Hz (processed).

  • Max acoustic output: 141 dB SPL peak @ 1 m in half-space.

 

 

--> DBS 18-2 iSP Control APP is here

--> The Photo gallery is here

--> The Product brochure is here